Thermal Grizzly Conductonaut Liquid Metal Heat Sink Compound Thermal Paste 1g

Description

Description:
Thermal Grizzly
Conductonaut
is a high performance liquid metal thermal compound. Our
Conductonaut
liquid metal thermal compound is designed for applications that require very high efficiency.
Conductonaut
is recommended for experienced users who are looking for a top performance product with best heat dissipation where temperature ranges are above 8 °C.
Ultra high thermal conductivity
Increased indium content
Easy application with synthetic needle
Properties:
Thermal Grizzly Conductonaut liquid metal thermal compound is based on a eutectic alloy. A special combination of metals like tin, gallium and indium results in very high thermal conductivity and excellent long-term stability.
Application:
Thermal Grizzly
Conductonaut
is recommended for applications that require extremely high thermal conductivity at room temperature – e.g. between a silicon chip PC microprocessor and heat sink. The liquid metal compound compensates even the slightest irregularities, which can not be achieved with convenstional thermal greases.
Storage:
Thermal Grizzly
Conductonaut
should be stored boxed and under dry conditions at room temperature.
Application
Rating
Thermal Conductivity
*******
Sub-Zero Overclocking
*
Overclocking
*****
Water Cooling
*****
Air Cooling
*****
Silicone Sensitive Areas
—
Thermal Grizzly
Conductonaut
is a liquid metal thermal compound based on a eutectic alloy. Our special mixture of metals like tin, gallium and indium,
Conductonaut
excels with a very high thermal conductivity. We recommend to apply
Conductonaut
on nickel plated surfaces since this will provide the best long term stability in performance.
*following DIN 51412-1
All of these data were determined and confirmed with the technical facilities of http://overclocking.guide.
Trademark Information:
Thermal Grizzly is a registered trademark.
Please note:
The data in this technical data sheet are based on our current knowledge and experience. Due to the large amount of possible factors, this should not be construed as to release the users from doing their own tests and screening. No legally binding assurance of specific properties or applicability for a concrete purpose should be derived from these data. Please consider contacting us for further detail. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
Note:
Conductonaut
thermal grease must not be used with aluminum heatsinks!
Please note:
Conductonaut
is a liquid metal compound and can leave visual residues.
For best long term performance results we recommend to use coolers with nickel plated surface.
Quick Start Guide
Applying THERMAL GRIZZLY Thermal Conductonaut
Important:
Avoid eye and skin contact! Keep away from children!
Contact a doctor immediately if swallowed or after eye contact!
Conductonaut
is based on liquid metal and
must not be used with coolers made out of aluminium! Contact with aluminium will result in a permanent damage of the cooling unit! Coolers with Direct-HeatpipeTouch may only be used if the base is made out of copper!
The surface of a CPU heatspreader is made out of nickel plated copper which is compatible to
Conductonaut
. Conductonaut may also be used directly on silicon.
1. Clean the contact surface
Clean the surface of CPU and cooler with the included cleaning cloth. Both surfaces have to be dry and free of all residues.
2. Applying
Conductonaut
thermal grease
Mount the included tip to the syringe
(Figure 1). Apply a pinheadsized amount on both, CPU and cooler
(Figure 2). Spread the thermal grease on both surfaces with the included cotton swabs. An increased contact pressure of the cotton swab might ease the application. Now mount the cooler.
Phone Links UK
Thermal Grizzly Conductonaut Liquid Metal Heat Sink Compound Thermal Paste 1g
Apple
Samsung
Nokia
Sony
HTC
Huawei
LG
Blackberry
OnePlus
Lenovo
Motorola
Acer
Microsoft
Tools & Gadgets
Nintendo
Xiaomi
Google
Asus
HP
Description:
Thermal Grizzly
Conductonaut
is a high performance liquid metal thermal compound. Our
Conductonaut
liquid metal thermal compound is designed for applications that require very high efficiency.
Conductonaut
is recommended for experienced users who are looking for a top performance product with best heat dissipation where temperature ranges are above 8 °C.
Ultra high thermal conductivity
Increased indium content
Easy application with synthetic needle
Properties:
Thermal Grizzly Conductonaut liquid metal thermal compound is based on a eutectic alloy. A special combination of metals like tin, gallium and indium results in very high thermal conductivity and excellent long-term stability.
Application:
Thermal Grizzly
Conductonaut
is recommended for applications that require extremely high thermal conductivity at room temperature – e.g. between a silicon chip PC microprocessor and heat sink. The liquid metal compound compensates even the slightest irregularities, which can not be achieved with convenstional thermal greases.
Storage:
Thermal Grizzly
Conductonaut
should be stored boxed and under dry conditions at room temperature.
Application
Rating
Thermal Conductivity
*******
Sub-Zero Overclocking
*
Overclocking
*****
Water Cooling
*****
Air Cooling
*****
Silicone Sensitive Areas
—
Thermal Grizzly
Conductonaut
is a liquid metal thermal compound based on a eutectic alloy. Our special mixture of metals like tin, gallium and indium,
Conductonaut
excels with a very high thermal conductivity. We recommend to apply
Conductonaut
on nickel plated surfaces since this will provide the best long term stability in performance.
*following DIN 51412-1
All of these data were determined and confirmed with the technical facilities of http://overclocking.guide.
Trademark Information:
Thermal Grizzly is a registered trademark.
Please note:
The data in this technical data sheet are based on our current knowledge and experience. Due to the large amount of possible factors, this should not be construed as to release the users from doing their own tests and screening. No legally binding assurance of specific properties or applicability for a concrete purpose should be derived from these data. Please consider contacting us for further detail. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
Note:
Conductonaut
thermal grease must not be used with aluminum heatsinks!
Please note:
Conductonaut
is a liquid metal compound and can leave visual residues.
For best long term performance results we recommend to use coolers with nickel plated surface.
Quick Start Guide
Applying THERMAL GRIZZLY Thermal Conductonaut
Important:
Avoid eye and skin contact! Keep away from children!
Contact a doctor immediately if swallowed or after eye contact!
Conductonaut
is based on liquid metal and
must not be used with coolers made out of aluminium! Contact with aluminium will result in a permanent damage of the cooling unit! Coolers with Direct-HeatpipeTouch may only be used if the base is made out of copper!
The surface of a CPU heatspreader is made out of nickel plated copper which is compatible to
Conductonaut
. Conductonaut may also be used directly on silicon.
1. Clean the contact surface
Clean the surface of CPU and cooler with the included cleaning cloth. Both surfaces have to be dry and free of all residues.
2. Applying
Conductonaut
thermal grease
Mount the included tip to the syringe
(Figure 1). Apply a pinheadsized amount on both, CPU and cooler
(Figure 2). Spread the thermal grease on both surfaces with the included cotton swabs. An increased contact pressure of the cotton swab might ease the application. Now mount the cooler.
We only accept payment by verified PayPal accounts with a confirmed address. Please note that when you pay by an eCheque through PayPal it can take up to 5-7 working days for it to clear, which will delay the dispatch process.
All items will be dispatched within 24 hours after receiving your payment. Kindly note that items purchased on weekends and Bank Holidays will be dispatched the next working day.
UK Delivery
Following are the methods used for delivery, which will be mentioned in the listing.
First Class Recorded
You will have to sign for this to receive your package. It can take up to 1 to 3 working days, BUT NOT GUARANTEED. A tracking number will be provided if requested.
First Class
It can take up to 1 to 3 working days, BUT NOT GUARANTEED.
Ireland & Europe Royal Airmail
3-5 working days, BUT NOT GUARANTEED.
We will only send replacement items once it has been confirmed lost by Royal mail. This can take up to 14 working days for UK customers and up to 30 working days for International customers. We cannot be held responsible for delays caused by Royal mail, your local postal service or by International customs inspection.
"We want you to be 100% happy with your purchase and offer a 30 day "no quibble" guarantee"
Warranty & Returns
If you are not happy with the product, you can return it within 30 days as long as it is in it's original condition/packaging and unused. No questions asked.
Prior to returning any item. please get in touch with us so we can help you efficiently.
Buyers will be responsible for the return cost. We will only be able to return or replace items that we have actually received.
General Questions
If you have any general questions then please contact us via eBay message service only.
Please allow up to 24 hours for responses. You can also contact us via eBay message service for any wholesale enquiries. Please note that we are closed on Sundays.
Refund / replacement / return order enquires.
If you want to contact us for a product you have sent back to us to see whether we have received it or not, please go to the Royal Mail website to confirm whether the parcel has been delivered to our business center and then allow 48 hours after we receive it to contact you
Business Hours
Mon-Fri 10am to 5pm
Business Address
143 Westmoreland Road
Bromley, Kent
BR2 0TY (UK)
"
"
(
)
"
"
(
)
"
"
(
)
"
"
(
)
"
"
(
)
4.1
9504
3448
phonelinksuk
10-12-2018 11:39:22
10-12-2018 11:39:22