K5-PRO 400g viscous thermal paste for thermal pad replacement free S&H from USA

Description

K5-PRO viscous thermal paste is developed and produced by Computer Systems laboratories research department. This product was developed as part of C.S. Labs BGA rework research project with the support of Greece and Europian Union. This product is designed to reduce the chances of BGA component failure for reasons related to overheating. This listing is offering a packet of K5-PRO gummy thermal paste .This packet includes 400g of K5-PRO gummy thermal paste for use instead of soft thermal pads that are usually installed inside computers and other commercial electronics. This quantity is enough for about 800 applications. Packet contains: 400g K5-PRO high quality / high thermal conductivity gummy thermal paste You can see our application instructions videos on our youtube page " ComputerSystemsGR ". When you should replace the thermal paste / pads in your computer: Thermal paste and thermal pads should be replaced every time that the heat sink is removed (for cleaning, upgrade or other maintenance). Replacing the thermal pads and the gummy thermal paste that is used by Apple on the memory chips is very important if the heat sink is removed because if you reuse the same thermal pads or paste the heat sink is impossible to fit perfectly again and the component will be overheated and will fail soon. If your computer is overheated or turns off after a few hours of use. In this case the entire heatsink system must be cleaned immediately and all thermal paste and thermal pads must be replaced. K5-PRO is produced in EU (Thessaloniki Greece) from 100% EU produced materials. This in not a low cost Chinese product.
K5-PRO is a high quality gummy / sticky thermal paste designed for use on memory chips and GPUs of various computers including Acer Aspire 6930 , Apple iMac A1311 video boards. This is the only comercially avaliable product at the moment that can replace the gummy thermal paste that is originally used by Apple.
K5-PRO can replace soft thermal pads that are used on computers (up to 3mm thick)
K5-PRO has thermal conductivity K>5,3 W/m.K (at least 3 times higher than common thermal pads that are used on computers and comercial electronics) Computer Systems materials science laboratory testing : Method using a comparative technique (P. Karydopoulos, P. Frantzis, N. Karagiannis MSAIJ 2014)
K5-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 250 degrees (Celcium) and has a long operational life time (practically infinite)
Expiration date: No expiration date (new formula). Infinite storage / service life. Protect from frost and dust
Payment through Paypal only
Shipping will be through post office sixth day delivery service with tracking worldwide. Please understand that we have no control over holidays and customs delays