Arts Crafts DIY Kit P-40 Airplane Warbird Aviation Weathervane Whirligig USA

Description

This wooden Airplane kit is cut from 1/2" Cedar and has a wingspan of 18" . It mounts on a 3/8" x 4"  pin that's included. The Kit includes everything but EPOXY glue,  paint and the tools to make this airplane whirligig .
The difficult steps have been done . Holes are drilled and the propeller is assembled. We believe this is a kit for beginners .
You'll need to ...
1 ) square the rounded inside corners on the fuselage to fully seat the wing
2 )  sand and paint the plane however  you'd like
3 )  EPOXY the mounting stem and pivot ball in the pre drilled pocket. ( Instructions  provided )
4 ) attach the wing with 2 screws and the tail can be glued with EPOXY or you can drill a hole in the tail piece and use the extra screw provided to secure the tail.
These wood pieces should be sanded and well  sealed to last as long as possible
These cedar weathervanes will weather gracefully  outside barring any  physical assault.
We use cedar for the plane and mahogany for the propellers that have a nylon bushing , a stainless steel stem , galvanized screws and a brass propeller screw .
• The mounting pin is steel and should
be kept greased once it has been
installed.