1600 BATTERY & PEAK CHARGER FOR MINELAB EXCALIBUR MODEL 800, 1000 / MADE IN USA

Description

TENERGY 1600mah
NiMH battery pack with a peak detection charger for the Minelab Excalibur 800 and 1000 metal detectors.  Over twice the capacity of the factory battery. Replaces the battery in your waterproof pod. Why buy a whole new pod when all you have to do is change the battery? The included peak charger will fully charge your pack in less than 2.5 hours!
FITS IN BOTH THE OLD & NEW EXCALIBUR 800/1000, EXCALIBUR II PODS, & SWORD.
Not a cheap imported pack- Manufactured right here in the
U.S.A.!
LISTING INCLUDES
Minelab 12v 1600mA battery
700mA Peak Detection charger (120-240VAC input)
FEATURES:
Cells: NIMH 1600mA 2/3 A
Built in 55C thermostat circuit protects the battery from overheating while charging!
Voltage- 12v (10 cell)
Capacity- 1600mah
Discharge rate- 16A
Size- L 4.07" x W 1.31" x H 1.31"
Battery weight- 9 oz
Charger input- 120-240vac 50/60Hz
Charger output- 8.4-12vdc
Charger weight- 6 oz
NOTE-
1) OLD MINELAB PODS ARE TAPERED AND WERE MANUFACTURED WITH ACRYLIC PLASTIC WHICH DETERIORATES WITH AGE AND SUNLIGHT. WHEN          THE POD STARTS SHOWING CRAZE MARKS- SMALL STRESS FRACTURES IN THE CLEAR PLASTIC IT IS TIME TO GET A NEW POD.
THE MINELAB ALKALINE POD IS EXACTLY THE SAME AS THE  DIVING POD...BUT HALF THE PRICE.
2) THE OLD PODS ARE ALSO TAPERED SO DO NOT FORCE THE BATTERY ALL THE WAY DOWN TO THE BOTTOM OF THE POD. LUBE THE EDGES OF THE PACK WITH DIELECTRIC GREASE AND ONLY PUSH IT DOWN ENOUGH TO GET THE ENDCAP INSTALLED.
INSTALLATION INSTRUCTIONS ARE INCLUDED
Check out our exceptional feedback from HUNDREDS of satisfied customers!!
BUY WITH CONFIDENCE!!!